HOMER Pro 3.15
You can select a default Hydrogen Tank from the drop-down menu on the Hydrogen Tank Library page under the Components Library. Click Hydrogen Tank to see the list of Hydrogen Tank types. You can view and specify the properties of library Hydrogen Tanks in the Hydrogen Tank Library. You can create a new Hydrogen Tank by copying an existing one and changing the properties as required. Give the new Hydrogen Tank a unique name to distinguish it from the others. HOMER adds the new Hydrogen Tank to your Component Library when you click OK. The new Hydrogen Tank then appears in the list of available Hydrogen Tank types on the Hydrogen Tank page under Design. See the Library section of the help for instructions.
General
|
Variable |
Description |
|
Name |
A unique name used to identify this type of hydrogen tank. |
|
Abbreviation |
A short, distinctive name to identify this hydrogen tank on the schematic and in the results. There is no specific limit on the abbreviation length, but long abbreviated names do not fit well on the schematic or results. |
|
Manufacturer |
An optional field used to specify the manufacturer of the hydrogen tank. |
|
Website |
An optional field to hold the website of the manufacturer. |
|
Url |
The actual web address of the link defined in the "Website" input. |
|
Notes |
An optional field used to specify manufacturer contact information, prices, or anything noteworthy. |
Other Properties
|
Variable |
Description |
|
Absolute tank level (kg) |
The initial tank level, if the initial tank level is specified as an absolute value in kg (see "Relative tank level" input below). |
|
AC |
Not used. |
|
Capacity (kg) |
The maximum amount of hydrogen that the tank can store, in kg. |
|
Lifetime |
The duration, in years, before the hydrogen tank is replaced. The replacement cost is incurred at that time. |
|
Relative tank level (%) |
The initial tank level, if the initial tank level is specified as a percent of capacity (see "Absolute tank level" input above). |
|
Require year end tank level to equal or exceed initial tank level |
If this input is checked, simulations with a lower tank level at the end of the year are infeasible. |
|
Use absolute tank level |
Selects absolute or relative tank level to specify the initial tank level. If this box is checked, the absolute tank level input is used to set the initial tank level. |
|
Component requires one minute time steps |
If you check this box, users of this component will have to set the simulation time step to one minute to run a calculation. Check this option if the component requires one-minute time steps to model the behavior accurately. |
Costs
The following inputs define the default value for the cost of the component.
|
Variable |
Description |
|
Cost matrix |
Click the down arrow on the right end of the row to use the cost matrix editor to input rows to the cost matrix. |
|
Cost multipliers (capital, replacement, O&M) |
Sets the default value for the cost multiplier sensitivity variables. In most cases these should all be set to 1. |
See also
